Rhino Rack MountainTrail Roof Bike Racks Review - 2012 Nissan Murano- Video

Today on this 2012 Nissan Murano, we're going to be testing the Rhino Rack Mountain Trail Rooftop Bike Rack, part number RBC035. As you can see, we already have the bike installed on the rack. Let's go ahead and take a closer look and see how it's attached. You're going to have 2 points of contact here. You're going to have a strap here at the rear at the wheel. You're going to have a skewer and fork mount up here at the front holding the bike down so there's going to be no real frame contact here to your bike. Let's go ahead and take the bike off and set it aside. more

Watch Video

2/29/2016 9:27:00 AM

Swagman Fork Down Roof Bike Rack Review - 2009 Nissan Murano- Video

Today on our 2009 Nissan Murano, we'll be test fitting the Swagman Fork Down roof-mounted bike carrier, part number S64710. With the factory roof rack system assembled onto our vehicle, we'll place our bike rack directly onto our crossbars. We'll begin at the front by taking the U bolts around the underside of the crossbar, and feeding them up through the platform of our bike rack. Once we have them through the platform, we can then install the wing nut to tighten them in place. We'll do this for both sides of the front platform. Here at the rear, we'll drop the U bolt through the top of the carrier, making sure it goes around our crossbar. more

Watch Video

8/6/2013 3:55:23 PM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2009 Nissan Murano- Video

Today on our 2009 Nissan Murano, we'll be test fitting the RockyMounts Tierod Stretch roof-mounted bike carrier, part number RKY1011. With the factory roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Tierod Stretch directly onto our crossbars. Here at the front, we'll bring the rubber-coated straps around our front crossbar, fitting them back into the head of the carrier. We can then remove the black plastic cover and use an Allen key to tighten the Allen bolt, to tighten our straps around our crossbars. Once we have those straps tight, we can then reinstall the black plastic cover. Here at the rear, we'll loosen up the bolt so that we can fit our rear clamp around our rear bar. more

Watch Video

8/6/2013 3:54:33 PM

Yakima FrontLoader Roof Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano well be test fitting the Yakima Frontloader Wheel Mount Bike Carrier, part number y02013. To begin our test fit well go ahead and place the carrier on top of our crossbars. Well go ahead and make sure that the front and rear clamps of our carrier go around our front and rear crossbars. Now we can use the hand knob at the very front of the carrier to tighten down our front clamp. Then we can move to the rear of the carrier where we can use the hand knob on the top of the carrier to secure our rear clamp. Now before we load our bike we need to make sure that our wheel strap in the rear is undone and that our wheel tray is open in the front. more

Watch Video

6/20/2013 3:02:15 PM

Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano well be test fitting the Yakima Forklift roof mounted bike carrier, part number Y02098. To begin our test fit well go ahead and set our carrier on top of our crossbars. Once we have it situated the way we like we can then go ahead and tighten down our front clamp by using the wing knob. Once we have our front clamp secured, we can then go ahead and slide our skewer holder back into place and reinstall our skewer. Once we have that tight we can then go ahead and move to the rear. Well make sure that our clamp is around our rear crossbar then well go ahead and tighten it down using the included wing hand knob. more

Watch Video

6/20/2013 3:01:30 PM

Thule Domestique Roof Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano well be test fitting the Thule Domestique Fork Mount Bike Carrier, part number th513. Now I went ahead and already removed the skewer so that I could access the Allen bolts to loosen our clamp. To begin our test fit well go ahead and place the carrier on top of our crossbars so we want to make sure that that front clamp goes around the front crossbar. Once we have the clamps in place, we can then go ahead and use an Allen key to tighten down the Allen bolts in the front. When we have that clamp secure, we can then go ahead and move to the rear and tighten that one down as well. Now we can go ahead and reinstall our skewer leaving it open for when we get ready to load our bike. more

Watch Video

6/20/2013 2:54:47 PM

Swagman Fork Down Roof Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano, we'll be test fitting the fork-style roof-mounted bike carrier from Swagman, part number S64710. To begin our test fit, we'll go ahead and lay the carrier on top of our crossbars. Now we'll go ahead and take the U bolts and place two of them up front. We want to make sure that we bring these up from the bottom. Then we can use the wing nuts to tighten them down. Now we can move to the rear of the carrier, where we'll install the U bolt from the top, run in through the clamp on the bottom, and then tighten with the wing nuts. more

Watch Video

6/20/2013 2:53:09 PM

RockyMounts TieRod Roof Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano well be test fitting the RockyMounts Tie Rod roof mounted bike carrier part #: RKY1014. To begin our test fit well place the carrier on top of our crossbars. We want to make sure that the rubber coated steel straps at the front go around our front crossbar and that the bracket in the rear goes around our rear crossbar. Once we have those in place we can then go ahead and tighten at the front by using an Allen key to tighten down the bolt. Then we can move to the rear to use an Allen key to tighten down our rear clamp. Once we have that tight we can then go ahead and move back to the front and reinstall our cover over our skewer. more

Watch Video

6/19/2013 4:53:17 PM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Nissan Murano- Video

Today on our 2013 Nissan Murano well be test fitting the RockyMounts Tie Rod Stretch roof mounted bike carrier part #: RKY1011. To begin our test fit well go ahead and place the carrier on top of our crossbars. Then we can go ahead and remove the plate thats covering the front part of our carrier. Well take the rubber coated steel straps, put them underneath the front crossbar and then lock them back into position. Then we can move to the rear where well take out the Allen bolt, swing our clamp around the rear crossbar and put it back into place. Then we can move back up to the front where well take an Allen key and tighten down those straps. more

Watch Video

6/19/2013 4:52:36 PM

  1